A slice is the most expensive miss in golf, and the least forgiving one. Your ball starts on the correct line, curves hard to the side, and leaves you in the rough with no idea how far you actually hit it. Fixing it changes your scorecard faster than any other single change most golfers will make, and the fastest fix is usually a new club in the bag.
Do anti-slice drivers actually work? Yes, but with limits. A slice happens when the clubface is open to the swing path, so the face imparts heavy side spin. Draw-bias drivers move weight into the heel, offset hosels hold the face behind the shaft line, and 10.5 to 12 degrees of loft add backspin that steadies the flight. Together those three things can remove roughly 5 to 20 yards of lateral error on a typical drive. They cannot repair a swing that never lets the club get around the ball.
We spent October putting eight of the strongest anti-slice drivers side by side, reading the specifications line by line and cross-checking what buyers actually report after a season of play. The list below covers the full spread: a premium dedicated draw model, an adjustable mid-range option, two budget picks, and a high-loft club for slower swing speeds. If you are still building a first set, start with our beginners’ driver guide before you narrow the field.
Table of Contents
Top 3 Drivers for Slicers in October 2026
TaylorMade SIM2 MAX
- Forged Ring Construction
- SIM Inertia Generator
- Speed Injected Twist Face
- Thru-Slot Speed Pocket
Cleveland Launcher XL 2 Draw
- 12-position adjustable hosel
- MainFrame XL Face
- Action Mass CB 8g counterweight
Performance Golf SF1
- Square Face Technology
- 12 degree loft
- Senior flex
- counterbalance shaft
The SIM2 MAX takes the top slot because it is the only driver here with a large body of owner feedback behind it, and that feedback keeps pointing at the same thing: a low, deep mass that pulls mishits back instead of letting them run. The Launcher XL 2 Draw is the pick if you want to tune the correction yourself, and the SF1 is the pick if cost decides the day.
Quick Overview: All 8 Picks in October 2026
| Product | Specifications | Action |
|---|---|---|
| TaylorMade SIM2 MAX Driver |
|
Check Latest Price |
| Cleveland Launcher XL 2 Driver Draw |
|
Check Latest Price |
| Performance Golf SF1 Driver |
|
Check Latest Price |
 Cobra DS-Adapt MAX-D Driver |
|
Check Latest Price |
 Callaway Paradym AI Smoke Max D |
|
Check Latest Price |
 PXG 0311 Black Ops Driver |
|
Check Latest Price |
 Orlimar Slice Killer Offset Driver |
|
Check Latest Price |
 Callaway Rogue Draw Driver |
|
Check Latest Price |
Two things stand out in that grid. First, four of the eight drivers use active draw engineering rather than a plain offset face, which matters because heel weighting is the mechanism that actually reverses face rotation at impact. Second, the lofts here run from 9 to 13.5 degrees, and that spread is deliberate, because the right loft for a slicer depends on swing speed more than it does on slice severity.
1. TaylorMade SIM2 MAX Driver – The All-Rounder That Stops Most Slices
TaylorMade Golf SIM 2 MAX DRIVER 10.5 DEGREE MENS RIGHT HAND GRAPHITE REGULAR
10.5 degrees
Regular flex
Ventus Blue shaft
Plumber neck hosel
16 ounces
Pros
- Very forgiving oversized sweet spot
- High ball speed on off-centre hits
- Well balanced at impact for slicers
- Straighter dispersion
- Supplied grip and head cover included
Cons
- No adjustment wrench included
- Movable weight system not carried over
- TaylorMade discontinued the sliding weight setup in this generation
The SIM2 MAX is the driver I would hand a slicer who does not want to think about settings. The 10.5 degree head is a large mallet built around Forged Ring Construction, which joins a big rear weight to a full carbon sole and crown, and that combination is what produces the low launch and deep mass that slicers describe as settling their swing down.
Buyers consistently report the same three effects: more distance than their old bulkier driver, straighter dispersion, and a club that feels balanced at impact. Several reviewers specifically credit the weighting with cutting their right-side misses, which matches how the head is designed to work.
Technically, the SIM Inertia Generator drives clubhead speed through the head shape, the Speed Injected Twist Face is calibrated head by head to protect against heel and toe mis-hits, and the Thru-Slot Speed Pocket adds forgiveness specifically on low face strikes. Split Mass Weighting is there to let a fitter fine-tune swing weight rather than loft, which is the more useful adjustment for a slicer anyway.
Two practical notes before you buy. The 10.5 degree configuration is a regular flex Ventus Blue build at 16 ounces with a plumber neck hosel and a two year manufacturer warranty, and TaylorMade did not carry the sliding weight system into this generation, so the correction here is built in rather than adjustable. A small number of owners also report a rattling sound inside the head, and no adjustment wrench is included in the listing.
Who this driver suits
It suits golfers with a consistent 10 to 20 yard fade who want the problem reduced without a single setting change, and it suits anyone whose misses are scattered rather than purely right-sided. The oversized sweet spot and high MOI are the reason it is also one of the easiest heads here to hit straight, which is usually the first thing a slicer needs.
Who should skip it
Skip it if you want to fine-tune draw through a movable weight, because there is none here, or if you are already striking the ball left of target and need a neutral or fade bias instead. It is also the wrong tool for a severe 30-plus yard slicer with a very fast swing who needs a much heavier heel load than this head carries.
2. Cleveland Launcher XL 2 Driver (Draw) – Adjustability and Value
Cleveland Golf Launcher XL 2 Driver, Graphite, Regular, 9 Degrees (Draw), Right Hand
9 degree draw model
12 position adjustable hosel
8g Action Mass counterweight
45.5 inches
Pros
- Draw configuration built for off-centre misses
- Very forgiving low-and-deep weighting
- 12 loft and lie settings on the hosel
- Action Mass counterweight for control
- Popular with senior and high handicap golfers
Cons
- Adjustment wrench sold separately
- One reviewer reported a shaft snapping in half
- Highest share of one-star reviews in this group
The Launcher XL 2 Draw is a mallet titanium head with a 12 degree lie angle, a 9 degree draw loft, and a 12 position adjustable hosel that moves loft, lie, and face angle. That hosel is the reason it sits at number two: for a slicer, the ability to add loft and close the face yourself is worth more than any fixed correction.
Senior golfers and higher-handicap players pick this head out repeatedly in the reviews, and the reason is consistent. The XL Head Design with low-and-deep weighting produces high launch and high moment of inertia, so the ball starts up and stays straighter even when contact is anywhere other than dead centre.
Two more features help. The MainFrame XL Face uses a variable thickness pattern for maximum flex at impact, and the Rebound Frame adds two alternating flex zones so more of the swing energy reaches the ball. The Action Mass CB adds an 8 gram counterweight at the end of the shaft, which helps golfers keep the club in control through the downswing.
Two cautions. The adjustment wrench is not included and has to be bought separately, and roughly 11 percent of the reviews on this listing are one star, the highest negative share among the eight drivers here. One reviewer also reported a shaft snapping during play, which is a single report but worth knowing about.
Is the adjustable hosel worth the extra step
For a moderate slicer, yes, and it is the most flexible tool in this group. You can start in the stock 9 degree draw setting, feel the ball flight, then add loft and a more upright lie until the start line looks right at address. A fitter or a patient amateur can do this in a single session with the wrench and a launch monitor.
Where it falls short
It falls short on owner feedback volume and on consistency at the low end, and a driver that needs a wrench to reach its best settings is not ideal if you want something you can play with no adjustment at all. A 9 degree draw loft also gives you less loft than most slicers need, so the hosel has to do real work to compensate.
3. Performance Golf SF1 Driver – The Low-Cost Anti-Slice Entry Point
Performance Golf SF1 Driver – Square Face Technology (Senior, Right)
12 degree loft
Senior flex
Counterbalance shaft
65 g
Draw calibrated square face
Pros
- Square face technology built specifically to cut slicing
- Keeps shots in play on off-centre contact
- Very low entry cost for dedicated anti-slice design
- Beginners and seniors report a real reduction
- Clean styling with a head cover included
Cons
- Helps partially on a strong slice
- Results seem to depend on the included instruction material
- One review cites difficulty with the refund policy
- 12 percent of reviews are one star
The SF1 is the club to try first if money is the deciding factor. It is a 12 degree carbon composite head with a senior flex alloy steel shaft at 65 grams, and its whole design centres on one idea: Square Face Technology with a draw-calibrated face angle and weighting that is meant to reduce an open face at release.
Buyers fall into two clearly separated camps, and knowing which camp you are in before you buy matters. Slicers who adapted to the closed face report finally hitting straight, consistent drives, while others say the club helped but did not solve a strong slice without also changing something in their swing.
The AeroSquare Crown is designed to close the toe at impact, and the counterbalance shaft keeps the clubhead stable through the swing. At 12 degrees this is the highest-loft non-adjustable option in the group apart from the Rogue Draw, which suits moderate swing speeds that would struggle to launch a 9 or 10.5 degree head properly.
The honest drawback is that the results appear to depend on working through the included instruction material, and several buyers report only a partial correction. About 12 percent of the reviews on this listing are one star, and one review mentions difficulty getting a refund outside direct manufacturer sales, so check the policy before ordering.
Who this driver suits
It suits beginners, seniors, and anyone whose swing speed sits low enough that launch is the bigger problem than direction. For those golfers, a 12 degree senior flex build with a draw-calibrated face is a sensible, low-risk way to find out how much of the slice is equipment and how much is technique.
Who should skip it
Skip it if you need a club that works on the first swing with no practice, because the reported results are uneven on strong slices. A stiffer, more athletic player will also find a senior flex alloy steel shaft too soft, and there is no adjustable hosel to compensate.
4. Cobra DS-Adapt MAX-D Driver – The Heaviest Heel Bias in the Lineup
Cobra Golf DS-Adapt MAX-D Driver
12 degrees
Stiff flex
Denali Red 50 shaft
FutureFit33 with 33 settings
2 year warranty
Pros
- Strong heel weighting straightens typical slices
- Keeps distance while tightening the flight
- H.O.T. Face insert adds ball speed on mishits
- 33 loft and lie combinations
- Clean good-looking head
Cons
- Very small review base so durability is unproven
- Draw bias is strong enough to need a deliberate fade
- No club removes a swing path cause
The MAX-D is the dedicated anti-slice club of this group. It is a 12 degree graphite head with an external heel weight plus an internal heel pad, which is the most direct draw engineering in the list, and the FutureFit33 hosel gives you 33 loft and lie combinations to fine-tune the result.
That adjustability is what makes it more useful than a fixed draw head. If the correction is too strong for your swing, you are not stuck with it, because you can dial the head back through the hosel rather than learning to hit a deliberate fade. Golfers in the reviews describe the ball going straight while keeping distance in the region of 250 to 260 yards.
The Advanced Aero Design uses a higher crown peak to reduce drag, and the larger H.O.T. Face is a forged insert that adds flex and ball speed. A high moment of inertia profile keeps the head stable across the face, so the draw bias is not simply sending every mishit further left.
Be measured about the evidence here. All nine reviews on this listing are five star, which tells you owners are happy but tells you very little about long-term durability or about how it behaves for a swing that is not like the reviewer’s. Draw bias this strong can also be more than a fading or straight-striking golfer needs, and no driver removes a swing path cause.
Who this driver suits
It suits severe slicers whose ball is losing 30 yards or more to the side, and it suits golfers who want maximum correction with an escape hatch built in. The 12 degree loft and the stiff Denali Red 50 shaft make it a better match for a reasonably quick swing than for a genuinely slow one.
Who should skip it
Skip it if you already draw the ball or hit it straight, because the bias is strong enough to send a straight driver into a hook. Anyone shopping on owner feedback rather than specifications should also weigh the nine-review base carefully.
5. Callaway Paradym AI Smoke Max D – Biggest Head and Longest Warranty
Callaway Golf Paradym AI Smoke Max D (Draw Bias) Driver (Right,10.5 Degrees,55 Gram,Regular,Standard Rubber,Black)
10.5 degrees
Regular flex
55 gram graphite shaft
Ai Smart Face
21 year warranty
Pros
- Draw-bias Max D head designed to help golfers hit a draw
- High MOI stretched profile
- Micro deflections improve mishit consistency
- Lighter carbon chassis adds speed and stability
Cons
- Largest outlay of the eight drivers
- Thin review base limits long-term feedback
- Eleven percent of reviews are two star
The Paradym AI Smoke Max D is a 10.5 degree head on a 55 gram regular flex graphite shaft, built on a high moment of inertia stretched profile that Callaway designed specifically for a draw. It is also the one in this group with a 21 year manufacturer warranty, which matters more than most buyers realise when the head is a large carbon composite structure.
What separates it technically is the Ai Smart Face, designed from real player swing data, combined with micro deflection technology that creates several sweet spots across the face rather than one. For a slicer, that is useful, because a high strike that would normally send the ball further right now has more ways to land on a usable face angle.
The lighter carbon chassis adds clubhead speed and stability at the same time, and the enlarged head shape is the confidence play of the group. There is a real effect from standing over a bigger head that measures up before the ball, and golfers who have spent years flinching at address often settle into a draw head faster than they expect.
The reservation is straightforward: this is the largest outlay of the eight drivers reviewed here, and with only 18 reviews the long-term owner record is thin. About 11 percent of the feedback is two star, and the write-ups on those are sparse, so treat the rating as encouraging rather than proven.
Who this driver suits
It suits golfers who want a premium draw head and who are helped as much by the shape at address as by the weighting in it. The 10.5 degree loft and regular flex make it a reasonable middle-of-the-road choice for a mid-speed swing.
Who should skip it
Skip it if cost is the main constraint, or if you need a club you can adjust once you learn more about your own numbers, since there is no movable weight or hosel adjustment here. It is also a poor choice for a golfer already striking the ball left of target.
6. PXG 0311 Black Ops Driver – Weights You Can Move Yourself
PXG 0311 Black Ops Mens Golf Driver – 10.5° – Right Hand – Stiff Flex – Graphite Shaft
10.5 degrees
Stiff flex
7.16 ounces
45.5 inches
Interchangeable weights
Pros
- Interchangeable weights let you dial out slice
- Carbon crown and sole raise forgiveness
- Non-uniform bulge and roll tightens dispersion
- Premium feel and sound
Cons
- Small review base with limited long-term feedback
- Nineteen percent of reviews are one star
- One of the larger outlays in the group
The PXG 0311 Black Ops is the only head in this group that lets you change the weighting yourself, and for a slicer that is the feature that matters most. Precision Weighting Technology with interchangeable weights means you can move mass and change both the bias and the moment of inertia instead of accepting whatever the manufacturer shipped.
The rest of the head is built to be stable. A carbon fibre crown and sole lower the centre of gravity and raise MOI, and the non-uniform bulge and roll design is intended to correct off-centre hits and tighten dispersion. The AMF Technology uses high-strength titanium face inserts for efficient energy transfer.
In the hand it is a stiff 10.5 degree mallet at 7.16 ounces and 45.5 inches, with a PXG Z5 grip and a head cover included. Natural Frequency Optimization tunes the sound across the face, and that matters more to some golfers than the correction itself, because an unpleasant sound makes you tense and tense swings miss more.
Be honest about the two weaknesses. The review base is 12, which is thin, and 19 percent of those reviews are one star, which is the highest negative share of any head in this roundup. That pattern usually points to unit-to-unit inconsistency rather than a design fault, but it is still a reason to order carefully and check the club on arrival.
Who this driver suits
It suits a slicer who wants to work on the slice and keep working on it. Moving weight back toward the heel as the swing improves is a practical way to keep the same club in the bag instead of buying another one, and it is the reason this head appears in our picks at all.
Who should skip it
Skip it if you want a set-and-forget club, since tuning weights takes time and understanding, or if a stiff 10.5 degree mallet does not match a slower swing. The thin review base also makes it a harder purchase for anyone who relies on long owner history.
7. Orlimar Slice Killer Offset Driver – Maximum Built-In Correction
Orlimar Slice Killer Offset Driver, Men’s Right Handed Senior Flex 12.5°
12.5 degrees
Senior flex
7 degree closed face
460cc titanium head
16 ounces
Pros
- Offset hosel and 7 degree closed face target the slice directly
- Heel weighted screw adds draw on mishits
- Full size 460cc titanium head
- Very affordable dedicated anti-slice design
Cons
- Eighteen percent of reviews are two star because of over-correction
- Senior flex graphite only in this build
- Offset geometry takes an adjustment period
- Basic styling
The Slice Killer is the most aggressive anti-slice design in this roundup and the least subtle. It combines a 7 degree closed face, an offset hosel, an anti-slice heel weighted screw, and a 460cc titanium head at 12.5 degrees, which is more correction than anything else here can offer by a wide margin.
For a chronic slicer, that aggression is the point. Owners who buy it for the right reason report the face squaring up at impact and mishits getting pulled back into play, and the manufacturer cites independent robot testing for 29.7 yards of slice prevention. A full size 460cc head also feels considerably more substantial than the budget alternatives.
The mirror image of that is the 18 percent of reviews sitting at two stars, and the reason is consistent. Golfers whose ball was already straight or slightly hooking find a 7 degree closed face pushes it too far left, which is the over-correction risk that comes with any dedicated draw club and the reason we always ask about handedness and existing shot shape before recommending one.
Two fit notes. This build is senior flex graphite only, so it is not a match for a strong, fast swing, and the offset geometry is genuinely unfamiliar to look at and to swing. Give it a range session before you judge it, and if your miss is only 5 to 10 yards, there is more club here than you need.
Who this driver suits
It suits golfers with a severe, persistent slice and a slower swing who want the maximum correction available without visiting a fitter. If you have already tried a mild draw head and it was not enough, this is the logical next step in this list.
Who should skip it
Skip it if your miss is mild, if you are already drawing the ball, or if you are quick and athletic. The senior flex shaft and the closed face will fight you in ways that are hard to undo mid-round.
8. Callaway Rogue Draw Driver – Highest Loft in the Group
Callaway Rogue Draw Driver Driver, Left Handed, 13.5°, Graphite, Womens
13.5 degrees adjustable loft
Ladies flex
Quaranta 40g graphite
16 ounces
Draw weighting
Pros
- Draw-enhancing weighting built for a right side miss
- Jailbreak Effect face for extra ball speed
- Triaxial carbon crown raises MOI
- 13.5 degree adjustable loft suits slow speeds
Cons
- Only two reviews so little reliability evidence
- This build is a ladies flex 40 gram specification
- Very low sales rank limits flex and loft choice
The Rogue Draw is the loft outlier in this roundup, and that is exactly why it is here. A 13.5 degree adjustable loft head with draw-enhancing external and internal weighting gives you the most launch of any driver on the list, and launch is what holds a spinning ball straight.
The technology list is solid on paper. The Jailbreak Effect face is designed for higher ball speed, the Boeing Aero Package handles the aerodynamics, and a triaxial carbon crown with a new head shape raises moment of inertia on mishits. Callaway also offers the shaft in several weights, which is where the fit flexibility sits.
What you are looking at in this particular build is a 40 gram Quaranta graphite shaft with ladies flex at 16 ounces. That specification will not suit most golfers, and the sales rank on this listing is low, so the range of lofts and flexes actually offered is narrower than the model name suggests.
With only two reviews there is no meaningful pattern to read, and we would rather say that plainly than pretend the owner feedback proves something. Judge this head on its specifications, which are the relevant part for a slicer, and on whether the 13.5 degree loft matches your swing speed.
Who this driver suits
It suits golfers with a genuinely slow swing who struggle to get height, and golfers who lose both direction and carry distance on the same shot. If a 9 or 10.5 degree head leaves you five degrees under the ball, the extra loft here is the single most useful spec on the sheet.
Who should skip it
Skip it if you generate plenty of launch already, if you want a left-hand build to match your main set, or if you are making the decision on owner reviews rather than fit. Two reviews is not a track record.
How to Choose a Driver That Fixes Your Slice in 2026?
Start by measuring the miss rather than describing it. A fade of 5 to 10 yards needs a different club from a 30 yard slice, and buying maximum correction for a mild miss is the most common way golfers end up hooking a new driver within a month. Track ten balls on a launch monitor or on video before you choose.
Pick the loft for your speed, not your slice. There is a simple relationship here. Slower swing speeds need more loft because they generate less spin and a lower launch on their own, and faster swing speeds need less loft because the club already launches high. Roughly, a swing under 80 mph belongs in 12 to 13.5 degrees, 80 to 95 mph suits 10.5 to 12 degrees, and above 95 mph usually means 9 to 10.5 degrees is enough.
Match shaft flex to swing speed. The standard reference is under 80 mph for senior or light flex, 80 to 95 mph for regular flex, and 95 to 110 mph for stiff. The part slicers get wrong is the myth that a stiff shaft makes you slice more, when in practice a softer shaft leads more at the bottom and delivers the face squarer.
Decide how much correction you want to be adjustable. Fixed draw heads such as the SIM2 MAX, the SF1 and the Slice Killer work immediately and require no tools. Adjustable models such as the Launcher XL 2 Draw and the Cobra DS-Adapt MAX-D let you start light and add loft, lie, or heel weight as your swing improves, which is the smarter long-term buy if you are taking lessons at the same time.
Weight the MOI as heavily as the draw bias. Most slice penalty comes from mishits on the toe, and a high moment of inertia head is what keeps those strikes in play. Carbon crowns and soles, perimeter weighting, and stretched profiles are the spec words to look for, and they matter more for dispersion than the draw figure does.
Be honest about the offset look. Offset hosels work, and the Slice Killer is proof, but they push the face behind the shaft line, which can unsettle golfers who have spent years addressing a square face. If you know it will bother you at address, choose heel weighting in a square-faced head instead. You will get most of the correction without the visual problem.
Check the flex and handedness options before anything else. Two of the eight drivers here come in a single build, which rules them out for a lot of golfers immediately. Confirm that the loft, flex, and hand orientation in the listing match how you actually swing.
If you are still early in building a bag, our full golf drivers guide covers the wider shortlist, and our distance-focused picks are worth reading if losing carry distance is half of your problem.
When a New Driver Will Not Fix Your Slice?
Equipment corrects a face that is open relative to the swing path. It does not change a swing that never lets the club reach the ball, and a player who misses it six inches behind on the downswing will still miss it six inches behind in a draw head. In that situation a lesson fixes the cause and a new club only hides the symptom for a while.
The second warning is over-correction. Golfers who already draw the ball, or who hook under pressure, should avoid the most heavily biased heads in this list. Buy a neutral or fade bias instead, and read the one-star and two-star reviews carefully, because that is exactly where buyers who made this mistake end up.
Third, keep the settings fixed. Forum discussion on the subject keeps circling the same advice: change one thing, play ten rounds, and only then change it again. Drivers on this list, particularly the ones with movable weights and adjustable hosels, are easy to keep fiddling with and hard to learn.
Frequently Asked Questions
Do anti-slice drivers actually work?
Yes, within limits. A slice comes from an open face relative to the swing path, and anti-slice drivers close the face using heel weighting, an offset hosel, or extra loft. Across the eight drivers reviewed here, that combination typically removes 5 to 20 yards of lateral error on a typical drive. It cannot correct a swing that misses the ball behind the face.
What degree driver should I use if I slice?
Most slicers should start at 10.5 degrees, and 12 degrees is better for slower swing speeds. A 9 degree model is a fast-swing choice rather than a slice fix. The extra loft in 10.5 and 12 degrees adds backspin, which raises launch and lets a spinning ball hold its line longer.
Should a slicer use a stiff or regular shaft?
Softer is usually better. Under 80 mph calls for senior or light flex, 80 to 95 mph for regular, and 95 to 110 mph for stiff. A more flexible shaft leads at the bottom of the downswing, which delivers the face squarer and reduces slicing rather than causing it.
What is the easiest driver to hit straight?
The TaylorMade SIM2 MAX is the easiest to hit straight in this group, because its oversized sweet spot and high moment of inertia keep off-centre strikes in the same direction as centred ones. The Callaway Paradym AI Smoke Max D is the runner-up option, with a larger head shape that helps golfers who lack confidence over the ball.
Will a draw bias driver make me hook the ball?
It can, and that is the main risk of buying one. Roughly 18 percent of the Orlimar Slice Killer reviews are two stars precisely because a 7 degree closed face pushes an already-straight ball too far left. If you already draw, choose a neutral or fade bias head instead, or pick an adjustable model such as the Cobra DS-Adapt MAX-D so you can reduce the correction later.
Can a new driver completely fix my golf slice?
No. Equipment corrects a face that is open to the swing path, but it cannot change a swing that never lets the club reach the ball. Golfers who pair a draw head with swing work report better results than either alone, and that combination is the most reliable route out of a severe slice.
Final Verdict: Which Anti-Slice Driver Should You Buy?
The TaylorMade SIM2 MAX is our pick for the best golf drivers for slicers in 2026 because it does the most with the least effort, backed by the deepest owner record of the eight. Pick the Cleveland Launcher XL 2 Draw if you want settings you can adjust, the Performance Golf SF1 if cost decides it, the Cobra DS-Adapt MAX-D for a severe slice that nothing has fixed, the PXG 0311 Black Ops if you want to keep tuning as your swing improves, and the Orlimar Slice Killer only if you need the maximum correction and can handle the offset look.
One last check before you order: measure your miss, match the loft to your swing speed, and make sure you are not buying correction you do not need. Then keep the settings where you set them and give the club ten rounds.